|
|
Gas flow measurement
Slováček, Antonín ; Šedivá, Soňa (referee) ; Beneš, Petr (advisor)
The diploma thesis brings a description and realization of new measuring devices which are designed to support student´s laboratory practice of air flow measurement techniques. The new devices and laboratory exercises help students get experience of several methods of measuring which they get to know during mandatory Bachelor's and Master's study programmes. The paper also includes a theoretical background, the knowledge of which is necessary for mastering the issue. Moreover, the paper comprises a literary search of sensors and a market research. The second part of the thesis presents possibilities of the laboratory workplace, and the results of the measurements of the new laboratory devices used for sample laboratory exercises.
|
|
| |
|
|
Measurement of passive frequency crossovers for loudspeaker systems
Holínský, Jan ; Hanák, Pavel (referee) ; Balík, Miroslav (advisor)
The content of the master´s thesis is to approach the issue of measuring the characteristics of passive frequency crossover. The work describes individual types of measured characteristics and their possibility of measurement. Then the work describes design of modules for measurement characteristics of passive frequency crossover (shunt, resistive load and amplifier). These modules were made and tested for its functions. For the amplifier is then made a second design for fulfilment requirements. The second version isn’t made in this work. At the end of the work was prepared the theoretical part of the laboratory task: Measurement of characteristics of passive frequency crossover, including protocol.
|
|
|
Laboratory kit for design work with Altera CPLD devices
Gajdošík, Petr ; obrany, Petr Bojda, Univerzita (referee) ; Kolouch, Jaromír (advisor)
In this thesis I aim at a design of the laboratory kit and study ways how to programme CPLD devices made by Altera company. The product is used for development and demonstration of applications in CPLD devices made by Altera company. The kit is designed for Altera programming cables and Presto (made by ASIX). Input signals are implemented by a set of switches and buttons on the board. Output states are displayed by LED diods, possibly connected to multiplex the display. The user can connect to external devices via external inputs. Thesis is also aimed at the design PCB of the laboratory kit, subsequent production, recovery and verification of compatibility ALTERA and PRESTO programmers. End of the thesis aims on working with the Quartus II design environment. In particular, it is a guide to working with templates and simulation of VHDL designs.
|
|
|
Laboratory device focused on the switched capacitor circuits
Urban, Lukáš ; Šotner, Roman (referee) ; Petržela, Jiří (advisor)
This Master`s thesis is focused on through acquaintance of principles of the function circuits with switched capaticors and posibility of their application mainly in frequency filters or signal generators. The origin of the switched capacitor circuits is mentioned at the beginning of the work. There are references to the first scientific work and scientists who have dealt with this issue. Maxwell`s idea: lossy element (resistor) replace with lossless element (switched capacitor) in electric circuit, is further described. In the next chapter of this work are listed types of switching capacitors and their use in simple RC filters and in structures of inverted or noninverted integrators and their application in more complex higher order filters. The advantages and disadvantages of SC circuits versus circuit composed of discrete components are shown. It is also listed a simple low-pass switched RC filter implemented with analogue multiplexer 4053. Using the LTC1043 integrated circuit, which structure and properties are described and analyzed in detail in the work, the 1st order aktive or pasive low and high pass filters were designed and subsequently simulated in the computer simulator OrCAD PSpice v.10. Another chapter deals with the integrated circuits higher order filters, structure and properties of the integrated filter LTC1060 are further analyzed here. Except this IC there are mentioned integrated filters commercially less available from the corporations Linear Technology and Maxim. The main objective of thesis was to propose and establish laboratory device and laboratory measurment focused on the switched capacitor circuits. The laboratory device has been designed with integrated circuits LTC1043 and LTC1060, which is demonstrated by using passive and active integrator, 2nd order band-pass and 4th order band-pass with Chebyshevovou approximation.
|
|
|
Signal of heartbeats – laboratory tool
Vyplel, Vojtěch ; Vychodil, Josef (referee) ; Sigmund, Milan (advisor)
This work deals with the development of a laboratory device for measuring heart rate. The work will describe the basic anatomy of the heart and the origin of heartbeats. There are also methods for measuring heart rate. A sensor for sensing a heart rate in a laboratory device is described in detail. The work presents the circuit solution of the laboratory device and measurement of its functionality. Furthermore, the work describes the application for the evaluation of heart rate and written instructions for laboratory exercises.
|
|
|
Laboratory kit for experimental work with CoolRunner devices
Gajdošík, Petr ; Kubíček, Michal (referee) ; Kolouch, Jaromír (advisor)
This bachelor´s thesis deals with the programming of the CPLD device from the CoolRunner.II family, made by Xilinx company, through the use of USB bus. This bus and its application is an integral part of many devices nowadays. These programmable devices are used very often, mainly because of their speed and flexibility. They can be used in many different applications. The main task is to design a laboratory kit containing input switches, outputs of signaling LED diods and a 7segments display. Next possibility is to connect it with a chance plug in many external inputs and outputs. The thesis contains some examples of programs in the VHDL language.
|
|
|
Demonstration set for basic keying techniques
Žlebek, Lukáš ; Šilhavý, Pavel (referee) ; Číž, Radim (advisor)
This thesis concerns itself with construction of a set of laboratory products, used for demonstrating the basic methods of digital modulation. The primary product, is a generator of carrier and keying signals, which generates cyclically repeated data, and a carrier signal. Another two products are ASK and BPSK modulators. The theoretical part of this thesis describes a basic summary of different kinds of modulation and the design of all the product prototypes themselves. The practical part proves the functionality of individual components of the generator and the functionality of the modulators. In the last part of this thesis, there is a proposal of the laboratory task and its sample solution.
|
|
|
Universal passive frequency crossover - laboratory device
Pacek, Dominik ; Hanák, Pavel (referee) ; Balík, Miroslav (advisor)
The aim of this work is to theoretically outline the issues associated with design of a passive crossover network in the context of speaker system design and the solutions to the mentioned issues.The practical part of the work deals with the design of a laboratory passive crossover network, it’s construction and creation of laboratory task utilizing the crossover network for teaching loudspeakers and speaker systems course.
|
|
|
Equalizer with loudness regulation for laboratory measurements
Karkoška, Jan ; Šotner, Roman (referee) ; Kratochvíl, Tomáš (advisor)
This bachelor’s thesis deals with a draft and construction of the design of equalizer with loudness regulation for laboratory measurements lessons and also simulation of individual parts in the program LTspice. For design was used bandpass correction with series resonance circuits. All bands are tuned to a frequency f0 with a degree of ± 12 dB. Thesis includes block diagram, design of equalizer in detail, scheme of equalizer with physiological regulation and the design of printed circuit boards.
|
guest ::
